430 6000A Thin Flexi 61cm (24in) AC Clamp meter
(item no. 4531725, 4531733)
The i430 Flex is an AC current probe utilizing the Rogowski principle. The flexible and lightweight measuring head allows quick and easy installation in hard to reach areas, without batteries or an external power source.
Also available as a pack of 4 pieces of the i430 current clamp, to be used for high current measurements. The Flex clamp fits around bus bars and large or hard-to-reach conductors. This 4-pack is perfect for use with 3-phase tools such as the Fluke 430 series.
Specifications: Fluke i430 Flex
| General Specifications | |
| Probe and cable material | TPE rubber, reinforced insulation |
| UL94 V-0, Colour: RED Munsell 7.5 | |
| R 1/14 | |
| Couplings material | Polypropylene, UL94 V-0 |
| Probe cable length | 610 mm |
| Probe cable diameter | 12.4 mm |
| Probe cable bend radius | 40 mm |
| Output cable length | 2.5 meters RG58 |
| Output connector | Safety BNC Connector |
| Operating range | -20 to +90°C |
| Storage temperature | -40 to +105°C |
| Operating humidity | 15% to 85% (non condensing) |
| Degree of protection (Probe) | IP41 |
| Specifications | |
| Current range | 3000 A AC rms |
| Voltage output (@ 1000 A rms, 50 Hz) | 85 mV |
| Accuracy | ±1% of reading |
| (@ 25°C, 50 Hz) | |
| Linearity (10% to 100% of range) | ±0.2% of reading |
| Noise (10 Hz – 7 kHz) | 1.0 mV AC rms |
| Output impedance | 82 Ω min |
| Load impedance | 50 kΩ |
| Internal resistance per 100 mm probe length | 10.5 Ω ± 5% |
| Bandwidth (-3 dB) | 10 Hz to 7 kHz |
| Phase error (45 – 65 Hz) | ±1° |
| Position sensitivity | ±2% of reading max. |
| Temperature coefficient | ±0.08% max of reading per °C |
| Working voltage (see Safety Standards section) | 1000 V AC rms or DC (head) |
| 30 V max. (output) | |
| Safety Specifications | |
| Safety standards | BS EN 61010-1 2001 |
| BS EN 61010-2-032 2002 | |
| BS EN 61010-031 2002, 1000 Vrms, Category III, Pollution Degree 2 | |
| Use of the probe on uninsulated conductors is limited to 1000 V AC rms or DC and frequencies below 1 kHz. | |
| Please note that this probe is designed to work with Fluke 435, if used with other products | |
| safety rating for the output to earth is limited to 600 V AC rms or DC. | |
Manuals
| Shipping | This Item Ships from Fremantle, Perth, Western Australia |
Please allow 2 - 10 days for your order to arrive.
Although Most Stocked Products will generally Ship Overnight. We source products from all over the world to bring you epic offers and the lowest prices. This means sometimes you have to wait a little longer to get your order but it's always worth it!
Returns are easy.
simply contact us for a returns number and send your item to our returns centre for fast processing. We'll get you a replacement or refund in a snap!
Description
430 6000A Thin Flexi 61cm (24in) AC Clamp meter
(item no. 4531725, 4531733)
The i430 Flex is an AC current probe utilizing the Rogowski principle. The flexible and lightweight measuring head allows quick and easy installation in hard to reach areas, without batteries or an external power source.
Also available as a pack of 4 pieces of the i430 current clamp, to be used for high current measurements. The Flex clamp fits around bus bars and large or hard-to-reach conductors. This 4-pack is perfect for use with 3-phase tools such as the Fluke 430 series.
Specifications: Fluke i430 Flex
| General Specifications | |
| Probe and cable material | TPE rubber, reinforced insulation |
| UL94 V-0, Colour: RED Munsell 7.5 | |
| R 1/14 | |
| Couplings material | Polypropylene, UL94 V-0 |
| Probe cable length | 610 mm |
| Probe cable diameter | 12.4 mm |
| Probe cable bend radius | 40 mm |
| Output cable length | 2.5 meters RG58 |
| Output connector | Safety BNC Connector |
| Operating range | -20 to +90°C |
| Storage temperature | -40 to +105°C |
| Operating humidity | 15% to 85% (non condensing) |
| Degree of protection (Probe) | IP41 |
| Specifications | |
| Current range | 3000 A AC rms |
| Voltage output (@ 1000 A rms, 50 Hz) | 85 mV |
| Accuracy | ±1% of reading |
| (@ 25°C, 50 Hz) | |
| Linearity (10% to 100% of range) | ±0.2% of reading |
| Noise (10 Hz – 7 kHz) | 1.0 mV AC rms |
| Output impedance | 82 Ω min |
| Load impedance | 50 kΩ |
| Internal resistance per 100 mm probe length | 10.5 Ω ± 5% |
| Bandwidth (-3 dB) | 10 Hz to 7 kHz |
| Phase error (45 – 65 Hz) | ±1° |
| Position sensitivity | ±2% of reading max. |
| Temperature coefficient | ±0.08% max of reading per °C |
| Working voltage (see Safety Standards section) | 1000 V AC rms or DC (head) |
| 30 V max. (output) | |
| Safety Specifications | |
| Safety standards | BS EN 61010-1 2001 |
| BS EN 61010-2-032 2002 | |
| BS EN 61010-031 2002, 1000 Vrms, Category III, Pollution Degree 2 | |
| Use of the probe on uninsulated conductors is limited to 1000 V AC rms or DC and frequencies below 1 kHz. | |
| Please note that this probe is designed to work with Fluke 435, if used with other products | |
| safety rating for the output to earth is limited to 600 V AC rms or DC. | |
Manuals
Shipping
| Shipping | This item ships to |
Delivery & Returns
Please allow 2 - 10 days for your order to arrive.
Although Most Stocked Products will generally Ship Overnight. We source products from all over the world to bring you epic offers and the lowest prices. This means sometimes you have to wait a little longer to get your order but it's always worth it!
Returns are easy.
simply contact us for a returns number and send your item to our returns centre for fast processing. We'll get you a replacement or refund in a snap!
Reviews
6 Great reasons to buy from us:
-
30 Days Return
If your product is faulty or damaged under manufacture warranty, simply send it back to us and we'll cheerfully replace it or fix the problem for you. -
Returns are Easy
Simply contact us for a returns number and send your item to our returns centre for fast processing. We'll get you a replacement or refund in a snap! -
Best Price Guarantee
In the unlikely event that you find your item cheaper at another online store, just let us know and we'll beat the competitor's pricing hands-down. -
We guarantee your satisfaction
We insist that you love everything you buy from us. If you're unhappy for any reason whatsoever, just let us know and we'll bend over backwards to make things right again. -
100% Safe & Secure
Ordering from Laserman Technologies is 100% safe and secure so you can rest easy. Your personal details are never shared, sold or rented to anyone either. -
Best Laser Warranties in the Business
Laserman the Best Laser Level, Pipe Laser and Laser Measuring Warranties in the Business - Now thats unbeatable value !!.
Related Products
