5606 Full Immersion PRT 50MM, -200 TO 160C
(item no. 3622830, 3622848, 3622853, 3622866, 3622875, 3622882, 3622894, 3622907, 3622918)
The 5606 Full Immersion PRTs are designed to perform in extreme environments where both the transition junction and the lead wires are required to withstand temperatures covering the entire operating range of the probe. (“Immersion” in this case simply means exposure to temperatures other than ambient and does not necessarily refer to the medium to which the PRT and its components are subjected.)
Applications where “full immersion” of probe, transition junction, and lead wire is required can include calibration or validation of sensors used in laboratory or bio freezers, walk-in refrigerators, autoclaves, ovens, stability test chambers, furnaces or incubators. Other applications might include IQ/ OQ/PQ qualification procedures, temperature mapping, or data logging in temperature controlled spaces or environmental chambers.
The 5606 is just two inches (50 mm) in length with a sheath diameter of 1/8 inch (3.1 mm). Since it can be fully immersed over its entire temperature range, you don’t have to worry about calculating minimum immersion depth— immerse the entire probe, transition junction, and lead wires, in either non-corrosive liquids or dry mediums ranging from –200 °C to 160 °C.
The 100 Ω precision sensing element (alpha = 0.00385) is specially constructed to prevent the ingress of moisture while achieving calibration accuracies as good as ± 0.05 °C. You get both accuracy and flexibility built into a small, durable package.
The lead wires of the 5606 are made of single-conductor enamelled copper wire which prevents moisture from wicking to the sensing element as it would if a more common, stranded lead wire were used. The diameter of the lead wire is no greater than 0.2 mm, making it easy to run lead wires through a freezer door to your readout or transmitter with effectively zero energy loss. The 5606 has been proven in common heat transfer fluids such as silicone oil, mineral oil, ethanol, and even liquid nitrogen with no degradation of the transition junction seal or lead wire insulation.
If you need longer lead wire than the standard length, call one of our Application Specialists today for a free quote. They can also help you determine which readout and probe termination are best suited for your application or help you select the right calibration for your probe.
FEATURES
- 5606: -200 °C to 160 °C
- Calibration accuracy of ± 0.05 °C
- Transition junction and lead wires can withstand full PRT temperature range
- Unique probe seal of 5606 prevents ingress of moisture
- Calibration not included; NVLAP-accredited calibration optional
SPECIFICATIONS
| General Specifications | |||
| Temperature range |
|
||
| Nominal resistance at 0.01 °C |
|
||
| Temperature coefficient |
|
||
| Accuracy[1] |
|
||
| Short-term repeatability[2] |
|
||
| Drift[3] |
|
||
| Hysteresis |
|
||
| Sheath length |
|
||
| Sheath diameter |
|
||
| Sheath material |
|
||
| Transition junction temperature range[4] |
|
||
| Sensor length |
|
||
| Sensor location |
|
||
| Minimum insulation resistance |
|
||
| Minimum immersion length |
|
||
| Maximum immersion depth in liquid medium |
|
||
| Response time[5] |
|
||
| Self heating (in 0 °C bath) |
|
||
| Lead-wire cable type |
|
||
| Lead-wire length |
|
||
| Lead-wire temperature range |
|
||
| Calibration |
|
||
[1] Includes calibration and 100 hr drift (k = 2).
[2] Three thermal cycles from min to max temp, includes hysteresis, 95 % confidence (k = 2).
[3] After 100 hours at max temp, 95 % confidence (k = 2).
[4] Temperatures outside this range will cause irreparable damage.
[5] Per ASTM E 644.
| Calibration uncertainty | ||
|
|
5606 | |
| Temperature | 1924 Calibration Uncertainty† | Tolerance w/out Calibration‡ |
| -197 °C | 0.03 °C | 0.4 °C |
| -38 °C | 0.03 °C | 0.2 °C |
| 0 °C | 0.03 °C | 0.1 °C |
| 100 °C | 0.045 °C | 0.3 °C |
| 157 °C | 0.05 °C | 0.4 °C |
|
|
|
|
|
† Lab code 200348-0 ‡ Each PRT includes a measured R0 value. An uncalibrated 5606 meets ASTM E 1137 Grade A Classification of Tolerances. Use the coefficients below to achieve the tolerances listed in the “No Calibration” column or calculate the Grade A tolerance using the following formula: Grade A = ± [0.13 + 0.0017|t|]°C where: |t| = value of temperature (°C) without regard to sign. See ASTM E 1137. R0: Enter the R0 value provided A: 3.9083 x 10–3 B: –5.775 x 10–7 C: –4.183 x 10–12 |
||
Models & Accessories
| Model Name | Description |
|---|---|
| 5606-50-X |
Probe, Immersion PRT, 50 mm, –200 to 160 °C (No calibration included. See recommended calibration options below. Contact your Fluke Calibration representative for additional calibration options.) X = termination. Specify “A” (INFO-CON for 914X), “B” (bare wire), “D” (5-pin DIN for Tweener Thermometers), “G” (gold pins), “J” (banana plugs), “L” (mini spade lugs), “M” (mini banana plugs), “P” (INFO-CON for 1523 or 1524), or “S” (spade lugs). |
| Shipping | This Item Ships from Fremantle, Perth, Western Australia |
Please allow 2 - 10 days for your order to arrive.
Although Most Stocked Products will generally Ship Overnight. We source products from all over the world to bring you epic offers and the lowest prices. This means sometimes you have to wait a little longer to get your order but it's always worth it!
Returns are easy.
simply contact us for a returns number and send your item to our returns centre for fast processing. We'll get you a replacement or refund in a snap!
Description
5606 Full Immersion PRT 50MM, -200 TO 160C
(item no. 3622830, 3622848, 3622853, 3622866, 3622875, 3622882, 3622894, 3622907, 3622918)
The 5606 Full Immersion PRTs are designed to perform in extreme environments where both the transition junction and the lead wires are required to withstand temperatures covering the entire operating range of the probe. (“Immersion” in this case simply means exposure to temperatures other than ambient and does not necessarily refer to the medium to which the PRT and its components are subjected.)
Applications where “full immersion” of probe, transition junction, and lead wire is required can include calibration or validation of sensors used in laboratory or bio freezers, walk-in refrigerators, autoclaves, ovens, stability test chambers, furnaces or incubators. Other applications might include IQ/ OQ/PQ qualification procedures, temperature mapping, or data logging in temperature controlled spaces or environmental chambers.
The 5606 is just two inches (50 mm) in length with a sheath diameter of 1/8 inch (3.1 mm). Since it can be fully immersed over its entire temperature range, you don’t have to worry about calculating minimum immersion depth— immerse the entire probe, transition junction, and lead wires, in either non-corrosive liquids or dry mediums ranging from –200 °C to 160 °C.
The 100 Ω precision sensing element (alpha = 0.00385) is specially constructed to prevent the ingress of moisture while achieving calibration accuracies as good as ± 0.05 °C. You get both accuracy and flexibility built into a small, durable package.
The lead wires of the 5606 are made of single-conductor enamelled copper wire which prevents moisture from wicking to the sensing element as it would if a more common, stranded lead wire were used. The diameter of the lead wire is no greater than 0.2 mm, making it easy to run lead wires through a freezer door to your readout or transmitter with effectively zero energy loss. The 5606 has been proven in common heat transfer fluids such as silicone oil, mineral oil, ethanol, and even liquid nitrogen with no degradation of the transition junction seal or lead wire insulation.
If you need longer lead wire than the standard length, call one of our Application Specialists today for a free quote. They can also help you determine which readout and probe termination are best suited for your application or help you select the right calibration for your probe.
FEATURES
- 5606: -200 °C to 160 °C
- Calibration accuracy of ± 0.05 °C
- Transition junction and lead wires can withstand full PRT temperature range
- Unique probe seal of 5606 prevents ingress of moisture
- Calibration not included; NVLAP-accredited calibration optional
SPECIFICATIONS
| General Specifications | |||
| Temperature range |
|
||
| Nominal resistance at 0.01 °C |
|
||
| Temperature coefficient |
|
||
| Accuracy[1] |
|
||
| Short-term repeatability[2] |
|
||
| Drift[3] |
|
||
| Hysteresis |
|
||
| Sheath length |
|
||
| Sheath diameter |
|
||
| Sheath material |
|
||
| Transition junction temperature range[4] |
|
||
| Sensor length |
|
||
| Sensor location |
|
||
| Minimum insulation resistance |
|
||
| Minimum immersion length |
|
||
| Maximum immersion depth in liquid medium |
|
||
| Response time[5] |
|
||
| Self heating (in 0 °C bath) |
|
||
| Lead-wire cable type |
|
||
| Lead-wire length |
|
||
| Lead-wire temperature range |
|
||
| Calibration |
|
||
[1] Includes calibration and 100 hr drift (k = 2).
[2] Three thermal cycles from min to max temp, includes hysteresis, 95 % confidence (k = 2).
[3] After 100 hours at max temp, 95 % confidence (k = 2).
[4] Temperatures outside this range will cause irreparable damage.
[5] Per ASTM E 644.
| Calibration uncertainty | ||
|
|
5606 | |
| Temperature | 1924 Calibration Uncertainty† | Tolerance w/out Calibration‡ |
| -197 °C | 0.03 °C | 0.4 °C |
| -38 °C | 0.03 °C | 0.2 °C |
| 0 °C | 0.03 °C | 0.1 °C |
| 100 °C | 0.045 °C | 0.3 °C |
| 157 °C | 0.05 °C | 0.4 °C |
|
|
|
|
|
† Lab code 200348-0 ‡ Each PRT includes a measured R0 value. An uncalibrated 5606 meets ASTM E 1137 Grade A Classification of Tolerances. Use the coefficients below to achieve the tolerances listed in the “No Calibration” column or calculate the Grade A tolerance using the following formula: Grade A = ± [0.13 + 0.0017|t|]°C where: |t| = value of temperature (°C) without regard to sign. See ASTM E 1137. R0: Enter the R0 value provided A: 3.9083 x 10–3 B: –5.775 x 10–7 C: –4.183 x 10–12 |
||
Models & Accessories
| Model Name | Description |
|---|---|
| 5606-50-X |
Probe, Immersion PRT, 50 mm, –200 to 160 °C (No calibration included. See recommended calibration options below. Contact your Fluke Calibration representative for additional calibration options.) X = termination. Specify “A” (INFO-CON for 914X), “B” (bare wire), “D” (5-pin DIN for Tweener Thermometers), “G” (gold pins), “J” (banana plugs), “L” (mini spade lugs), “M” (mini banana plugs), “P” (INFO-CON for 1523 or 1524), or “S” (spade lugs). |
Shipping
| Shipping | This item ships to |
Delivery & Returns
Please allow 2 - 10 days for your order to arrive.
Although Most Stocked Products will generally Ship Overnight. We source products from all over the world to bring you epic offers and the lowest prices. This means sometimes you have to wait a little longer to get your order but it's always worth it!
Returns are easy.
simply contact us for a returns number and send your item to our returns centre for fast processing. We'll get you a replacement or refund in a snap!
Reviews
6 Great reasons to buy from us:
-
30 Days Return
If your product is faulty or damaged under manufacture warranty, simply send it back to us and we'll cheerfully replace it or fix the problem for you. -
Returns are Easy
Simply contact us for a returns number and send your item to our returns centre for fast processing. We'll get you a replacement or refund in a snap! -
Best Price Guarantee
In the unlikely event that you find your item cheaper at another online store, just let us know and we'll beat the competitor's pricing hands-down. -
We guarantee your satisfaction
We insist that you love everything you buy from us. If you're unhappy for any reason whatsoever, just let us know and we'll bend over backwards to make things right again. -
100% Safe & Secure
Ordering from Laserman Technologies is 100% safe and secure so you can rest easy. Your personal details are never shared, sold or rented to anyone either. -
Best Laser Warranties in the Business
Laserman the Best Laser Level, Pipe Laser and Laser Measuring Warranties in the Business - Now thats unbeatable value !!.
Related Products
