P5514 Pneumatic Calibrator
(Fluke Registration required before purchase. Please contact Laserman for more information on +61 8 9335 1718 )
(item no. 4341622, 4341631, 4341717, 4341721)
These instruments are used for checking pressure measuring instruments against master test gauges, indicators or transducers. These hydraulic pressure comparators provide a quick and easy solution for checking pressure measuring instruments to 10,000 psi (700 bar).
A pressure comparator supplies the same precisely controlled pressure to both a reference gauge and device under test for calibration. The P5514 is the preferred manual solution for hydraulic calibration workload below 10,000 psi.
Features
- Generates pressures to 10,000 psi (700 bar)
- Bench mounted design
- Operational with a wide range of fluids
- Screw press for fine pressure adjustments
- Can be used with the 2700G Reference Pressure Gauge to provide a complete calibration solution
Make it a Pressure Calibrator (P5514-2700G)
The Fluke Calibration P5514 Pressure Comparator when combined with the 2700G Reference Pressure Gauges becomes an easy-to-use alternative to traditional deadweight testers that covers a wide range of workload. For convenience, the P5514 is bundled together with selected 2700G Reference Pressure Gauges for a complete bench top pressure calibration solution. These pressure calibrators provide the accuracy, reliability, and capability you need to calibrate dial gauges, digital test gauges and pressure transmitters.
For example, the P5514-2700G-3 is a P5514 Pressure Comparator, bundled together with 2700G-G70M, 2700G-G20M, 2700G-BG7M. This calibrator has three pressure ranges corresponding to the three 2700G Reference Pressure Gauges in the bundle and covers a total pressure range of –12 psi to 10,000 psi (–80 kPa to 70 MPa).
Models and Specification
| Accessory | Description |
|---|---|
| P5521 and P5522 Liquid-to-Liquid Separators |
These liquid-to-liquid separators connect directly to the test port of a hydraulic deadweight tester or comparison test pump. A flexible diaphragm separates the fluids, protecting the calibrator from contamination, and allows calibration of the device in its specific working fluid. |
| P5543 Angle Adapter |
To calibrate gauges with the pressure connection on the rear (for example, panel mount gauges) in their correct operating position, an angle adaptor should be used. The angle adapter uses the standard gauge adapters and positions the gauges at 90º. The maximum working pressure of this unit is 10,000 psi (700 bar). |
| P5544 Two Gauge Stand |
This adapter mounts directly to the test port of the calibrator and allows for the calibration of two instruments at the same time, or the connection of a reference test instrument. Maximum working pressure is 10,000 psi (700 bar). |
| P5551 Pointer Remover / Punch |
This tool is designed to quickly remove and consistently refit the pointer of a pressure gauge. |
Knowledge and Information
| Product Manuals |
|---|
 P5514, P5514-V & P5514-EP Hydraulic Comparison Test Pump Users Manual (2 MB) |
| Brochures |
|---|
| Data Sheets |
|---|
| P5500 Series Data Sheet (1.77 MB) |
| Press Releases |
|---|
| Fluke Calibration 2700G Series Reference Pressure Gauges provide a highly accurate, versatile pressure measurement solution |
| Shipping | This Item Ships from Fremantle, Perth, Western Australia |
Please allow 2 - 10 days for your order to arrive.
Although Most Stocked Products will generally Ship Overnight. We source products from all over the world to bring you epic offers and the lowest prices. This means sometimes you have to wait a little longer to get your order but it's always worth it!
Returns are easy.
simply contact us for a returns number and send your item to our returns centre for fast processing. We'll get you a replacement or refund in a snap!
Description
P5514 Pneumatic Calibrator
(Fluke Registration required before purchase. Please contact Laserman for more information on +61 8 9335 1718 )
(item no. 4341622, 4341631, 4341717, 4341721)
These instruments are used for checking pressure measuring instruments against master test gauges, indicators or transducers. These hydraulic pressure comparators provide a quick and easy solution for checking pressure measuring instruments to 10,000 psi (700 bar).
A pressure comparator supplies the same precisely controlled pressure to both a reference gauge and device under test for calibration. The P5514 is the preferred manual solution for hydraulic calibration workload below 10,000 psi.
Features
- Generates pressures to 10,000 psi (700 bar)
- Bench mounted design
- Operational with a wide range of fluids
- Screw press for fine pressure adjustments
- Can be used with the 2700G Reference Pressure Gauge to provide a complete calibration solution
Make it a Pressure Calibrator (P5514-2700G)
The Fluke Calibration P5514 Pressure Comparator when combined with the 2700G Reference Pressure Gauges becomes an easy-to-use alternative to traditional deadweight testers that covers a wide range of workload. For convenience, the P5514 is bundled together with selected 2700G Reference Pressure Gauges for a complete bench top pressure calibration solution. These pressure calibrators provide the accuracy, reliability, and capability you need to calibrate dial gauges, digital test gauges and pressure transmitters.
For example, the P5514-2700G-3 is a P5514 Pressure Comparator, bundled together with 2700G-G70M, 2700G-G20M, 2700G-BG7M. This calibrator has three pressure ranges corresponding to the three 2700G Reference Pressure Gauges in the bundle and covers a total pressure range of –12 psi to 10,000 psi (–80 kPa to 70 MPa).
Models and Specification
| Accessory | Description |
|---|---|
| P5521 and P5522 Liquid-to-Liquid Separators |
These liquid-to-liquid separators connect directly to the test port of a hydraulic deadweight tester or comparison test pump. A flexible diaphragm separates the fluids, protecting the calibrator from contamination, and allows calibration of the device in its specific working fluid. |
| P5543 Angle Adapter |
To calibrate gauges with the pressure connection on the rear (for example, panel mount gauges) in their correct operating position, an angle adaptor should be used. The angle adapter uses the standard gauge adapters and positions the gauges at 90º. The maximum working pressure of this unit is 10,000 psi (700 bar). |
| P5544 Two Gauge Stand |
This adapter mounts directly to the test port of the calibrator and allows for the calibration of two instruments at the same time, or the connection of a reference test instrument. Maximum working pressure is 10,000 psi (700 bar). |
| P5551 Pointer Remover / Punch |
This tool is designed to quickly remove and consistently refit the pointer of a pressure gauge. |
Knowledge and Information
| Product Manuals |
|---|
| P5514, P5514-V & P5514-EP Hydraulic Comparison Test Pump Users Manual (2 MB) |
| Brochures |
|---|
| Data Sheets |
|---|
| P5500 Series Data Sheet (1.77 MB) |
| Press Releases |
|---|
| Fluke Calibration 2700G Series Reference Pressure Gauges provide a highly accurate, versatile pressure measurement solution |
Shipping
| Shipping | This item ships to |
Delivery & Returns
Please allow 2 - 10 days for your order to arrive.
Although Most Stocked Products will generally Ship Overnight. We source products from all over the world to bring you epic offers and the lowest prices. This means sometimes you have to wait a little longer to get your order but it's always worth it!
Returns are easy.
simply contact us for a returns number and send your item to our returns centre for fast processing. We'll get you a replacement or refund in a snap!
Reviews
6 Great reasons to buy from us:
-
30 Days Return
If your product is faulty or damaged under manufacture warranty, simply send it back to us and we'll cheerfully replace it or fix the problem for you. -
Returns are Easy
Simply contact us for a returns number and send your item to our returns centre for fast processing. We'll get you a replacement or refund in a snap! -
Best Price Guarantee
In the unlikely event that you find your item cheaper at another online store, just let us know and we'll beat the competitor's pricing hands-down. -
We guarantee your satisfaction
We insist that you love everything you buy from us. If you're unhappy for any reason whatsoever, just let us know and we'll bend over backwards to make things right again. -
100% Safe & Secure
Ordering from Laserman Technologies is 100% safe and secure so you can rest easy. Your personal details are never shared, sold or rented to anyone either. -
Best Laser Warranties in the Business
Laserman the Best Laser Level, Pipe Laser and Laser Measuring Warranties in the Business - Now thats unbeatable value !!.
Related Products
