(item no. 5069992)
Product Overview
Ideal for commercial and light industrial electricians, this kit measures voltage up to 1000 V AC. Additionally, it comes equipped with an electrical tester and a proving unit kit which is built to prove the functionality of the FieldSense and provides ac and dc voltages for other HiZ instruments.
Measure voltage up to 1000 V ac due to FieldSense technology, which easily and quickly takes measurements by sliding a conductor through the open fork. Additionally, without opening covers or removing wire nuts, on wires up to AWG 4/0 (120 mm2), carrying as much as 200 A which makes the jobs safer, faster and easier.
Features
- FieldSense technology for ac voltage, current and frequency measurement without making electrical contact to live voltage
- Simultaneous voltage and current display shows all power supply measurements at a glance for efficient troubleshooting
- 1 to 1000 V ac or dc
- 0.1 to 200 A ac
- Resistance 1 Ω to 100 kΩ
- Frequency measurement 45 to 66 Hz
- Works with wires up to AWG 4/0 (120 mm2) with a 0.7" (17.8 mm) jaw opening
- Hold button temporarily freezes the reading for easy viewing
- Easy to read display with backlight
Fluke PRV240FS Proving Unit
Reduces the need for personal protective equipment (PPE) when a known voltage source is not available for verification (PPE is still needed for absence of voltage testing when appropriate).
Features
- Sources both ac and dc steady-state voltage - supplies 240 V dc/ac
- A single LED indicates functionality, making this unit a simple-to-use solution for verification of your test tool
- Compatible with both high impedance or low impedance multimeters, clamp meters or two pole testers
- Voltage is sourced through recessed contacts that are activated when tested probes are inserted to avoid accidental contact
- Long battery life - 5000 tests per set of four AA batteries
Fluke T6-1000 Offers
Measure voltage … without test leads
Measure voltage up to 1000 V ac due to FieldSense technology, which easily and quickly takes measurements by sliding a conductor through the open fork. Additionally, without opening covers or removing wire nuts, on wires up to AWG 4/0 (120 mm2), carrying as much as 200 A which makes the jobs safer, faster and easier.
Features
- FieldSense technology for ac voltage, current and frequency measurement without making electrical contact to live voltage
- Simultaneous voltage and current display shows all power supply measurements at a glance for efficient troubleshooting
- 1 to 1000 V ac or dc
- 0.1 to 200 A ac
- Resistance 1 Ω to 100 kΩ
- Frequency measurement 45 to 66 Hz
- Works with wires up to AWG 4/0 (120 mm2) with a 0.7" (17.8 mm) jaw opening
- Hold button temporarily freezes the reading for easy viewing
- Easy to read display with backlight
Specifications
| FieldSense AC Voltage True RMS | |
| Requires Test Leads | No |
| Range | 1000 V |
| Resolution | 1 V |
| Accuracy | ±(3% + 3 counts) 45 to 66 Hz |
| FieldSense AC Current True RMS | |
| Requires Test Leads | No |
| Range | 200.0 A |
| Resolution | 0.1 A |
| Accuracy | ±(3% + 3 counts) 45 to 66 Hz |
| FieldSense Frequency (Hz) | |
| Requires Test Leads | No |
| Range | 45 to 66 Hz |
| Resolution | 1 Hz |
| Accuracy | ±(1% + 2 counts) |
| Volts AC True RMS | |
| Requires Test Leads | Yes |
| Range | 1000 V |
| Resolution | 1 V |
| Accuracy | ±(1.5% + 2 counts) 45 to 66 Hz |
| Volts DC | |
| Requires Test Leads | Yes |
| Range | 1000 V |
| Resolution | 1 V |
| Accuracy | ±(1% + 2 counts) |
| Resistance | |
| Requires Test Leads | Yes |
| Range | 1000 V 2000 Ω 20 kΩ 100 kΩ |
| Resolution | 1 V 1 Ω 0.01 kΩ 0.1 kΩ |
| Accuracy | ±(1% + 2 counts) |
| Safety | |
| Range | 1000 V CAT III 600 V CAT IV |
| General Specifications | |
| Calibration | One year calibration cycle |
| Jaw Opening | 0.7" (17.8 mm) |
| Operating Temperature | 14 to 122°F (-10 to 50°C) |
| Storage Temperature | -22 to 140°F (-30 to 60°C) |
| Operating Altitude | 6562' (2000 m) |
| Storage Altitude | 32,808' (10,000 m) |
| Relative Humidity | 0 to 90%, 41 to 86°F (5 to 30°C) 0 to 75%, 86 to 104°F (30 to 40°C) 0 to 45%, 104 to 122°F (40 to 50°C) |
| Battery Type and Life | 2 x AA (IEC LR6) 360 hours continuous Typical; 200 hours using FieldSense |
| Temperature Coefficient | 0.1 x (specified accuracy) /°C for <18 or >28°C |
| Safety | IEC/EN 61010-1: Pollution degree 2 |
| Electromagnetic Environment | IEC/EN 61326-1: Portable |
| Dimensions | 2.4 x 10.2 x 1.7" (61.1 x 259.3 x 43.8 mm) |
| Weight | 0.78 lb (350 g) |
Included:
- T6-1000 Electrical Teste
- PRV240FS Proving Unit
- Attached Test Leads, with 0.16" (4 mm) Removable Probe Caps
- User's Manual
Data Sheet
Datasheet for the Fluke T6-1000 Electrical Tester and Proving Unit Kit, 1000 V AC
| Shipping | This Item Ships from Fremantle, Perth, Western Australia |
Please allow 2 - 10 days for your order to arrive.
Although Most Stocked Products will generally Ship Overnight. We source products from all over the world to bring you epic offers and the lowest prices. This means sometimes you have to wait a little longer to get your order but it's always worth it!
Returns are easy.
simply contact us for a returns number and send your item to our returns centre for fast processing. We'll get you a replacement or refund in a snap!
Description
(item no. 5069992)
Product Overview
Ideal for commercial and light industrial electricians, this kit measures voltage up to 1000 V AC. Additionally, it comes equipped with an electrical tester and a proving unit kit which is built to prove the functionality of the FieldSense and provides ac and dc voltages for other HiZ instruments.
Measure voltage up to 1000 V ac due to FieldSense technology, which easily and quickly takes measurements by sliding a conductor through the open fork. Additionally, without opening covers or removing wire nuts, on wires up to AWG 4/0 (120 mm2), carrying as much as 200 A which makes the jobs safer, faster and easier.
Features
- FieldSense technology for ac voltage, current and frequency measurement without making electrical contact to live voltage
- Simultaneous voltage and current display shows all power supply measurements at a glance for efficient troubleshooting
- 1 to 1000 V ac or dc
- 0.1 to 200 A ac
- Resistance 1 Ω to 100 kΩ
- Frequency measurement 45 to 66 Hz
- Works with wires up to AWG 4/0 (120 mm2) with a 0.7" (17.8 mm) jaw opening
- Hold button temporarily freezes the reading for easy viewing
- Easy to read display with backlight
Fluke PRV240FS Proving Unit
Reduces the need for personal protective equipment (PPE) when a known voltage source is not available for verification (PPE is still needed for absence of voltage testing when appropriate).
Features
- Sources both ac and dc steady-state voltage - supplies 240 V dc/ac
- A single LED indicates functionality, making this unit a simple-to-use solution for verification of your test tool
- Compatible with both high impedance or low impedance multimeters, clamp meters or two pole testers
- Voltage is sourced through recessed contacts that are activated when tested probes are inserted to avoid accidental contact
- Long battery life - 5000 tests per set of four AA batteries
Fluke T6-1000 Offers
Measure voltage … without test leads
Measure voltage up to 1000 V ac due to FieldSense technology, which easily and quickly takes measurements by sliding a conductor through the open fork. Additionally, without opening covers or removing wire nuts, on wires up to AWG 4/0 (120 mm2), carrying as much as 200 A which makes the jobs safer, faster and easier.
Features
- FieldSense technology for ac voltage, current and frequency measurement without making electrical contact to live voltage
- Simultaneous voltage and current display shows all power supply measurements at a glance for efficient troubleshooting
- 1 to 1000 V ac or dc
- 0.1 to 200 A ac
- Resistance 1 Ω to 100 kΩ
- Frequency measurement 45 to 66 Hz
- Works with wires up to AWG 4/0 (120 mm2) with a 0.7" (17.8 mm) jaw opening
- Hold button temporarily freezes the reading for easy viewing
- Easy to read display with backlight
Specifications
| FieldSense AC Voltage True RMS | |
| Requires Test Leads | No |
| Range | 1000 V |
| Resolution | 1 V |
| Accuracy | ±(3% + 3 counts) 45 to 66 Hz |
| FieldSense AC Current True RMS | |
| Requires Test Leads | No |
| Range | 200.0 A |
| Resolution | 0.1 A |
| Accuracy | ±(3% + 3 counts) 45 to 66 Hz |
| FieldSense Frequency (Hz) | |
| Requires Test Leads | No |
| Range | 45 to 66 Hz |
| Resolution | 1 Hz |
| Accuracy | ±(1% + 2 counts) |
| Volts AC True RMS | |
| Requires Test Leads | Yes |
| Range | 1000 V |
| Resolution | 1 V |
| Accuracy | ±(1.5% + 2 counts) 45 to 66 Hz |
| Volts DC | |
| Requires Test Leads | Yes |
| Range | 1000 V |
| Resolution | 1 V |
| Accuracy | ±(1% + 2 counts) |
| Resistance | |
| Requires Test Leads | Yes |
| Range | 1000 V 2000 Ω 20 kΩ 100 kΩ |
| Resolution | 1 V 1 Ω 0.01 kΩ 0.1 kΩ |
| Accuracy | ±(1% + 2 counts) |
| Safety | |
| Range | 1000 V CAT III 600 V CAT IV |
| General Specifications | |
| Calibration | One year calibration cycle |
| Jaw Opening | 0.7" (17.8 mm) |
| Operating Temperature | 14 to 122°F (-10 to 50°C) |
| Storage Temperature | -22 to 140°F (-30 to 60°C) |
| Operating Altitude | 6562' (2000 m) |
| Storage Altitude | 32,808' (10,000 m) |
| Relative Humidity | 0 to 90%, 41 to 86°F (5 to 30°C) 0 to 75%, 86 to 104°F (30 to 40°C) 0 to 45%, 104 to 122°F (40 to 50°C) |
| Battery Type and Life | 2 x AA (IEC LR6) 360 hours continuous Typical; 200 hours using FieldSense |
| Temperature Coefficient | 0.1 x (specified accuracy) /°C for <18 or >28°C |
| Safety | IEC/EN 61010-1: Pollution degree 2 |
| Electromagnetic Environment | IEC/EN 61326-1: Portable |
| Dimensions | 2.4 x 10.2 x 1.7" (61.1 x 259.3 x 43.8 mm) |
| Weight | 0.78 lb (350 g) |
Included:
- T6-1000 Electrical Teste
- PRV240FS Proving Unit
- Attached Test Leads, with 0.16" (4 mm) Removable Probe Caps
- User's Manual
Data Sheet
Datasheet for the Fluke T6-1000 Electrical Tester and Proving Unit Kit, 1000 V AC
Shipping
| Shipping | This item ships to |
Delivery & Returns
Please allow 2 - 10 days for your order to arrive.
Although Most Stocked Products will generally Ship Overnight. We source products from all over the world to bring you epic offers and the lowest prices. This means sometimes you have to wait a little longer to get your order but it's always worth it!
Returns are easy.
simply contact us for a returns number and send your item to our returns centre for fast processing. We'll get you a replacement or refund in a snap!
Reviews
6 Great reasons to buy from us:
-
30 Days Return
If your product is faulty or damaged under manufacture warranty, simply send it back to us and we'll cheerfully replace it or fix the problem for you. -
Returns are Easy
Simply contact us for a returns number and send your item to our returns centre for fast processing. We'll get you a replacement or refund in a snap! -
Best Price Guarantee
In the unlikely event that you find your item cheaper at another online store, just let us know and we'll beat the competitor's pricing hands-down. -
We guarantee your satisfaction
We insist that you love everything you buy from us. If you're unhappy for any reason whatsoever, just let us know and we'll bend over backwards to make things right again. -
100% Safe & Secure
Ordering from Laserman Technologies is 100% safe and secure so you can rest easy. Your personal details are never shared, sold or rented to anyone either. -
Best Laser Warranties in the Business
Laserman the Best Laser Level, Pipe Laser and Laser Measuring Warranties in the Business - Now thats unbeatable value !!.
Related Products
